Toyota · 2004–2026
Highlander Hybrid Recalls
20 known recalls affecting the Toyota Highlander Hybrid (2004–2026). Enter your VIN to check if your specific vehicle is affected, or browse by model year below.
Toyota Highlander Hybrid Recalls
Summary
Issue: On a small number of vehicles, the bolt that secures the third-row center seat belt anchor to the roof may not have been installed properly. As a result, the seat belt could loosen or detach in a crash. Safety Risk: A seat belt that detaches in a crash could increase the risk of injury. Corrective Actions: To reduce the safety risk, Toyota advises that you shouldn't transport a passenger in the third-row center seat until the recall repairs are completed. Toyota will notify owners by mail and advise you to take your vehicle to a dealership to replace the third-row center seat belt upper anchor bolt.
Summary
Issue: On certain vehicles, the steering wheel spiral cable assembly could disconnect. If this happens, the airbag (SRS) warning lamp would turn on, and the driver-front airbag wouldn't work in a crash. This may also cause the horn or other steering wheel-mounted controls not to work properly. Note: This recall replaces Transport Canada recall no. 2023-386. Vehicles that were repaired under that recall don't require this repair. Safety Risk: An airbag that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect the production date of the spiral cable assembly, and replace it if necessary.
Summary
Issue: On certain vehicles, a sensor for the occupant classification system (OCS) may not have been manufactured properly. As a result, the sensor could short circuit and cause the airbag system to turn off the passenger-front airbag even when a passenger is seated. Note: This problem would cause a warning message to display on the instrument panel and the airbag indicator light would display "passenger airbag off". Safety Risk: An airbag that is turned off could increase the risk of injury to a passenger in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the OCS sensor.
Summary
Issue: On certain vehicles, the front lower bumper cover may not be attached properly. As a result, if there is a minor impact to the front bumper, the lower bumper cover, engine under cover, and the fender liners could separate from the vehicle while driving. Safety Risk: Parts that detach from the vehicle could create a road hazard for others and increase the risk of a crash. Corrective Action: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect the front bumper cover and secure it. If damage is found, the dealer will also replace the upper and/or lower front bumper cover(s).
Summary
This recall was replaced by Transport Canada recall no. 2025-242. Issue: On certain vehicles, the steering wheel spiral cable assembly could disconnect. If this happens, the airbag (SRS) warning lamp would turn on, and the driver-front airbag wouldn't work in a crash. This may also cause the horn or other steering wheel-mounted controls not to work properly. Safety Risk: An airbag that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect the production date of the spiral cable assembly, and replace it if necessary.
Summary
Issue: Under certain conditions, the vehicle stability control (VSC) system may not switch on when the ignition is restarted. This can happen if the driver manually turns off the VSC, depresses the brake pedal, and then turns off and restarts the vehicle while continuously depressing the brake pedal. Canadian regulations require the stability control system to be active each time that you start the vehicle. Safety Risk: A stability control system that is switched off could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to update the skid control ECU software.
Summary
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Summary
Issue: On certain vehicles, one or both of the front seats may have an incorrect trim cover installed. This could prevent the front seat-mounted side airbags from inflating properly in a crash. Safety Risk: An airbag that does not work properly could increase the risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the front seat trim covers. They will be replaced, as necessary.
Summary
On certain vehicles, the electrical power cords of some dealer installed block heaters may have been improperly manufactured, causing the wires to contact each other, resulting in a short circuit. A short circuit could lead to a fire which would increase the risk of injury and/or damage to property. Correction: For vehicles where the subject block heater was approved for installation, the dealer will replace the block heater assembly with a new one of an improved design. For vehicles where the subject block heater was not approved for installation, dealers will remove the block heater assembly. In the interim, until the remedy can be performed, dealers will cut the plug end from the block heater cord to disable the block heater's operation.
Summary
On certain vehicles, inconsistent application of grease during the manufacturing process could cause the driver's side power window master switch to stick or become inoperative due to electrical contact point wear. This could cause debris to accumulate between the contact points, potentially resulting in an electrical short circuit. If a short circuit occurs, the switch assembly may overheat, produce smoke, melt and/or potentially lead to a fire causing injury and/or property damage. Correction: Dealers will inspect the driver's power window master switch and apply a specialized grease that inhibits heat build-up, or replace the power window master switch circuit board, as necessary. Note: This is an expansion of recall 2012-338.
Showing 1-10 of 20 recalls
Toyota Highlander Hybrid by Year
Related Recall Checks
Check recalls for specific Toyota Highlander Hybrid model years